VCP6.5-DCV Practice Exam – Section 2

Reading Time: 1 minute
1. Which VLAN Types can be configured on a Distributed Portgroup? (Select all 3 that apply)
 
 
 
 

Question 1 of 26

2. What Port binding options are available on a Distributed Portgroup? (Select all 3 that apply)
 
 
 
 
 

Question 2 of 26

3. When updating from a v6.0.0 Distributed switch to a v6.5.0 Distributed switch, which new feature is made available?
 
 
 
 

Question 3 of 26

4. Which Distributed Port Group load balancing option is being described here:
Choose an uplink based on a hash of the source Ethernet
 
 

Question 4 of 26

5. The following statement is describing which Distributed Port Group Security policy?
Allows virtual machines to send frames with a Mac Address that is different from the one specified in the VMX
 
 
 
 

Question 5 of 26

6. The following statement is describing which Distributed Port Group Security policy?
Allows virtual adapters connected to this dvPortgroup to see all frames passed on the host proxy switch that are allowed under the VLAN policy for the dvPortgroup
 
 
 
 

Question 6 of 26

7. What Port allocation options are available on a Distributed Portgroup? (Select 2 that apply)
 
 
 
 
 

Question 7 of 26

8. When adding an ESXi Host to a Distributed switch, what Network Adapter tasks can be selected? (Select all 4 that apply)
 
 
 
 
 
 

Question 8 of 26

9. Which version of Network I/O Control (NIOC) is featured in vSphere 6.5?
 
 
 

Question 9 of 26

10. In a vSphere environment that has a mixture of v6.0 and v6.5 ESXi Hosts, when creating a new Distributed switch, which version should be selected?
 
 
 
 

Question 10 of 26

11. When creating a new Distributed Portgroup, which settings can be configured? (Select all 4 that apply)

new_distributed_portgroupv2
 
 
 
 
 
 

Question 11 of 26

12. What is the default Security policy on a Distributed Port Group?
distributed_portgroup_secuity_default_config
 
 
 
 

Question 12 of 26

13. Which Distributed Port Group load balancing option is being described here:
Choose an uplink based on the current loads of physical NICs.
 
 
 
 

Question 13 of 26

14. In order to limit the effects of a highly congested network, which setting can be used to guarantee a network traffic type is not effected?
 
 
 
 

Question 14 of 26

15. Which of the following needs to be performed before an ESXi Host can be removed from a Distributed switch? (Select all 3 that apply)

remove_host_distributed_switch
 
 
 
 
 

Question 15 of 26

16. Which of the following are prerequisites that should be verified before adding an ESX Host to a Distributed switch? (Select all that apply)
 
 
 
 
 

Question 16 of 26

17. During the process of adding an ESXi Host to a Distributed switch, what needs to be done once the Hosts physical networking adapter/s (vmnic/s) have been identified? (Select all 3 that apply)
 
 
 
 
 

Question 17 of 26

18. Which vCLI command would you use to configure an additional Default Gateway on a VMkernal Port?
 
 
 
 

Question 18 of 26

19. When creating a new Distributed Portgroup, what is the default vmnic Failover order?
distributed_portgroup_teaming_uplinks
 
 
 

Question 19 of 26

20. Which Distributed Port Group load balancing option is being described here:
Always use the highest order uplink, from the list of Active adapters, which passes failover detection criteria
 
 
 
 

Question 20 of 26

21. The following statement is describing which Distributed Port Group Security policy?
Allows virtual machines to receive frames with a Mac Address that is different from the one configured in the VMX.
 
 
 
 

Question 21 of 26

22. During the creation of a new Distributed switch, which of the following settings can be configured? (Select all 4 that apply)

new_distributed_switchv3
 
 
 
 
 
 

Question 22 of 26

23. To enable Netflow on a Distributed switch, which settings are required to be configured? (Select all 3 that apply)
 
 
 
 

Question 23 of 26

24. When configuring Network I/O Control (NIOC), which of the following options can be used to reserve or limit bandwidth? (Select all 3 that apply)
 
 
 
 

Question 24 of 26

25. When creating a new Distributed Portgroup, what load balancing options are available? (Select all that apply)
 
 
 
 
 

Question 25 of 26

26. Which of the following best describes Network I/O Control (NIOC)?
 
 
 

Question 26 of 26


 

Comments are closed.

 
 

Disclaimer

These practices exams are not meant to replicate the real exam. You will NOT find questions from the real exam within these practice exams. 

These VCP6.5 practice exams are designed to engage the thought process. DO NOT waste your time trying to memorize these questions/answers as they will not appear in your VCP exam. Instead, if you are unsure of an answer, go and revise the feature/product. This will ensure you have a better overall understanding and should be able to cope better when being asked other questions around those products/features. This exam is still in BETA, as such, some question/answers may be incorrect or misleading. Feel free to provide feedback via the Contact Me page.